MKS® Granville-Phillips® 902B Absolutdruck Piezo-Vakuummessröhre

Hinweis: Below you will find common methods to control your gauge / transducer. Please note that not all controllers are listed for every gauge / transducer. If you do not see the controller that you need, please contact your local KJLC Sales Representative .

• If the unit as an integrated display, it can be
  • Powered via a wall transformer / power supply (US). This item can be found in the accessories. If outside of the US, the power supply will need to be fabricated by the end user.
  • Connected directly to a PLC (data acquisition system) or computer. The interconnector cable will need to be supplied by the end user. The pinouts for this unit can be found in the manual.
• If the unit does not have an integrated display, it can be:
  • Powered via a controller. Suggested Controllers:
    • MKS PDR 900
    • MKS 946 Vacuum System Controller
  • Connected directly to a PLC (data acquisition system) or computer. The interconnector cable will need to be supplied by the end user. The pinouts for this unit can be found in the manual.

Compatible Controller	Beschreibung	Components Needed
MKS PDR 900	Single unit power supply and display with analog output and up to 3 setpoint relays (transducer dependent)	Need PDR900, MKS 902B, and interconnect cable. Power cable included.
MKS 946 Vacuum System Controller	Multi-unit power supply and simultaneous display, up to 6 setpoint relays, RS485 communications, and pressure control capability.	Need MKS 946, MKS 902B, and interconnect cable. Power cable included.